Version history

Version 9.89 (17,696 materials, 167,007 datasets, and 41,447 RT values) (detailed changes)

The thermal conductivity for C₁₂H₂₆ (n-dodecane) was too high by a factor of 100.
The reference for the elastic properties of PbTe was changed, the new values are significantly different.
The reference for the thermal conductivity/diffusivity for liquid 316 stainless was changed. New values are 50% larger.
The thermal expansion data for FLiNaK, (LiNaK)₂CO₃, and LiF(NaK)₂CO₃ used the incorrect temperature scale and have been fixed.
The composition labels for the n-octane/cyclohexane mixes were reversed.
The heat capacity/specific heat data for LiBr should only go down to 293 K not 100 K.
The reference for the electrical resistivity/conductivity for LaB₆ was changed. Above 200 K the differences are within 10%, below 200 K they are larger.
The specific heat data for ErPdIn and YbPdIn were incorrect. The wrong molecule weight was used in the conversion.
Several minerals were combined into one material.
You can now do a quick search within a material list instead of on the entire database. Right-click on a material list to access the pop-up menu.
A row of buttons to quickly change the plot axis types is available on the plot window. These can be show/hidden within the options menu.
The CAS and EC numbers have been added, mainly for organic compounds, for easier searching.

Version 9.87 (17,367 materials, 161,295 datasets, and 40,881 RT values) (detailed changes)

Fixed a bug in the search routines that could cause the program to crash.
Added thermal diffusivity data for some aluminum alloys.

Version 9.85 (17,364 materials, 161,272 datasets & 40,880 RT values) (detailed changes)

Added a new property: optical transmission.

Version 9.83 (17,337 materials, 159,047 datasets, and 40,697 RT values) (detailed changes)

The specific heat of 310 stainless was revised. The reference had a discontinuity near 47K. This was corrected.
The specific heat of R-449A (a hydrocarbon refrigerant) was incorrect and has been revised.
The loading time for the Windows version was reduced by about 50%.
New references were added for the thermal conductivity of Inconel 625, values were changed by approximately 5%.
The various different phases for TiO₂ (rutile, anatase, and brookite) have been combined under the material name TiO₂.

Version 9.81 (17,131 materials, 152,896 datasets & 40,584 RT values) (detailed changes)

Fixed bug where an error message would sometimes display when writing an output file for ABAQUS with a temperature dependent elastic modulus and a constant Poission's ratio. The data was not effected.
New reference for thermal expansion for 321H stainless steel, the MTE values are lower by 0% to 3%.

Version 9.79 (17,007 materials, 151,699 datasets & 40,557 RT values) (detailed changes)

New references for the density and thermal expansion of liquid lead and liquid iron.
New reference for thermal expansion for _Ti3Al.
In the composition search, salts and glasses can be searched by wt % or mol %.
Moved and rearranged some of the materials listboxes.
Fixed some scrolling issues on Mac OS X.

Version 9.77 (16,343 materials, 148,959 datasets & 38,673 RT values) (detailed changes)

The thermal expansion data for Nitronic 32 was too high by a factor of 1.8 and have been fixed.
Added new references for the thermal conductivity for Ti-6Al-4V, 304, and 316 and for the thermal diffusivity of Ti-6Al-4V at high temperatures. The thermal diffusivity for Ti-6Al-4V increased by approximately 50 %.
Added the UL94 flammability ratings for some polymers.

Version 9.75 (16,292 materials, 148,052 datasets & 38,559 RT values) (detailed changes)

The specific heat for the following materials were incorrect and have been fixed: YAG, Dy₃TaO₇, Er₃TaO₇, Eu₃TaO₇, Gd₃TaO₇, Ho₃TaO₇, La₃TaO₇, Lu₃TaO₇, Sm₃TaO₇.
The thermal expansion data for some Fe-Si binary alloys were refit, the changes were in the range of 1 % to 5 %.
The title of articles were added to most of the references. These can be turned on or off under "Output Options".
The links to several government reports have been updated. These seem to change over time.

Version 9.73 (16,167 materials, 145,940 datasets & 38,064 RT values) (detailed changes)

Fixed 2 bugs in the user materials routines when copying an existing user material to a new user material. The units of the new material may be changed depending on other settings and the name of the new material was blank.

Version 9.71 (16,167 materials, 145,937 datasets & 38,057 RT values) (detailed changes)

The thermal conductivity for SnO₂ was in error and has been corrected.
The thermal expansion data for liquid tin was changed.
Fixed several bugs in the user materials routines. If you have any user materials, at start-up you will be asked to edit several of your materials and redefine the units.
In the plots you can now use a comma instead of a decimal in the numbers.

Version 9.69 (15,672 materials, 143,742 datasets & 37,807 RT values) (detailed changes)

The elastic data (E, G, v, and K) for InN were in error and have been corrected.
You can force a tick mark at 0 on the y-axis in the plots.
In the plots for the Seebeck coefficient, if all of the values are negative, you can invert the y-axis.
In the reference field you can first click on an http link then right-click to open a browsers to the reference.
Several semi-conductors and thermoelectric materials have been moved and combined.

Version 9.67 (15,589 materials, 141,957 datasets & 37,513 RT values) (detailed changes)

The expansion data for PLA Ingeo Grade 78000D was too low by a factor of 100. This has been fixed.
You can edit the list of materials you select for the Multi-material plots. See the "Multi-plot" menu item for options.
Right-clicking on an element will pop-up a new selection menu.

Version 9.65 (15,566 materials, 141,439 datasets & 37,468 RT values) (detailed changes)

You can now make plots with data from several different materials. See "tips_and_tricks.pdf" for details.
Some more materials were moved from semiconductors to thermoelectrics.

Version 9.63 (15,450 materials, 139,998 datasets & 37,408 RT values) (detailed changes)

The electrical resistivity/conductivity data for Bi_0.5Sb_1.5Te₃ and dilute synthetic seawater were incorrect and have been corrected.
Added a new property: Seebeck coefficient versus temperature.
Fixed a bug that would prevent the plot image updating when resizing.
Additional data was added for the thermal expansion for Stellite 31.
The LMP for Inconel 8091 was refit.
Some materials were moved from semiconductors to thermoelectrics.

Version 9.61 (15,412 materials, 139,553 datasets & 37,380 RT values) (detailed changes)

The density data for several graphites were incorrect: Graphite CZR, Graphite HPD, Graphite SFG-1, Graphite DFP-1, Graphite PLS-1, Graphite SCF.
New references were added for the viscosity and expansion of some liquid metals and solders. Any change in values were only a few percent.
Added the DOI links for many references.

Version 9.59 (15,369 materials, 138,761 datasets & 37,320 RT values) (detailed changes)

The expansion data for several Corning glasses (1415, 1416, 1417, 1990, 7046, 7056, 7070, 7555, 7556, 7567, 7568, 7570, 7572, 7574, 7575, 7576, 7578, 7580, 7583, 7585, 7586, 7589, 7590, 7595, 7597, 7598, 7599, 7723, 7732, 7761, 8161, 8445, 8463, 9010, 9013, 9108, 9119) were high by a factor of 10.
A new reference was added for H11 tool steel thermal properties.
Several bugs were fixed and options added to the multi-plot dialog.

Version 9.57 (15,120 materials, 137,748 datasets & 36,790 RT values) (detailed changes)

The compressive stress-strain data for Al 7075 were incorrect due to an error in the reference. A correction was released by the authors and the data has been updated accordingly.
The expansion data for Ti-150A was incorrect and has been fixed.
The expansion data for Timetal 834 was incorrect in the reference. It was replaced with data from a new reference.
Data for Mg alloy AE44 was incorrectly labeled as being for AE33, this has been corrected.
Added the ability to display multiple curves in a single plot. This can only be done for a single property at a time and is useful when evaluating which curve is the best for your material.
Support for outputting data files for ANSYS has been removed. The database is now included with their GrantaDesign product and offers better integration with ANSYS.

Version 9.55 (15,068 materials, 136,977 datasets & 36,389 RT values) (detailed changes)

The compressive stress-strain data for Sn - 3.8 Ag - 4.8 Bi, UNS 26000, 300M, SX Rene N5, and CMSX-4 were incorrect. These have all been fixed.
Added data for CMSX-2 Plus, IN-939, and Inconel 718.

Version 9.53 (15,067 materials, 136,951 datasets & 36,362 RT values) (detailed changes)

When creating Ansys datafiles the program would hang for certain materials. This has been fixed.
Added a new file called "tips_and_tricks.pdf" which ducuments some hidden features you may not have found.
Refit several sets of viscosity data to the Arrhenius equation.
Added data for several sealing glasses and superalloys.
The units "mm/mm" can be added to the strain axis in stress-strain plots. This is turned on by default and can be changed in the "Options" menu.
Added support for several Unicode characters in the notes and compound names. This option has been moved to the "Options" menu item in the main window.

Version 9.51 (14,956 materials, 135,901 datasets & 35,932 RT values) (detailed changes)

The stress rupture for Waspaloy age hardened bar was in error and has been revised.
Data was added for several superalloys and magnetic materials.
Support for Unicode characters was added. This can be turned on/off in the units window. Some fonts don't support all of these characters so this option is off by default. Turning it on makes some labels easier to read.
You can now write a "changes" file to list the changes to the database since the last version. This is available under the "Materials" menu from the main window.
Fixed some rounding issues in the axis tick marks in the plots.

Version 9.49 (14,917 materials, 135,021 datasets & 35,670 RT values)

The thermal expansion data for Ti-4Al-4Mo-2Sn (IMI550) was incorrect and have been corrected. The correct values are 5% to 10% lower.
Added data for several glasses, several PMMAs, Colmonoy, Haynes 6B, Haynes 6K, Hastelloy HYBRID-BC1, Haynes G-35, Haynes NS-163, Haynes HR-224, Haynes 233, Haynes HR-235, and Haynes 25.
New references for H₂O and KCl were incorporated, some of the values changed by a few percent.
In Arrhenius type plots you can now use Rankine for the temperature scale.
In plots with a log scale for the x-axis you can now force the grid mark increment to be a factor of 10, as opposed to multiples of 10. This is available in the "Plot options->Axis options..." menu.

Version 9.47 (14,673 materials, 133,413 datasets & 34,636 RT values)

The thermal conductivity of Inconel HX / Hastelloy X / Nimonic PE13 was too high by a factor 100, this has been fixed.
Added data for several solders, graphites, and thermoelectric materials.
On Arrhenius type plots the temperature can be displayed on a 2nd x-axis. This option is on by default and can be turned off under the options menu. The current temperature scale is used for this 2nd axis.
In the composition search from the main menu, you can now search by the filler loading of polymers. You can also right-click in a particular polymer list and search that polymer type only.

Version 9.45 (14,570 materials, 132,338 datasets & 34,360 RT values)

The e-N fatigue data for 314 stainless steel, the UTS/YS data for Mg alloy HM31 F temper, and the thermal diffusivity for the 4 compacted graphitic irons were incorrect. These have been fixed.
Added the refractive index versus wavelength and temperature as new properties.
Added data for over 600 glasses and over 500 polymers.
Improved filtering options in the Search/Report dialog.

Version 9.43 (13,232 materials, 111,898 datasets & 26,625 RT values)

The creep data for Hytrel 4556 were incorrect. These have been fixed.
Added data for over 400 polymers.
Added stress-strain curves for Al 6005, Al 6111, Al 7075, 1035 steel, Ti-6Al-4V, C37700 and 34CrNi3MoV.

Version 9.41 (12,763 materials, 107,005 datasets & 23,391 RT values)

The heat capacity and specific heat data for Li₂₂Si₅, Li₁₃Si₄, Li₇Si₃ and Li₁₂Si₇ were incorrect. The labeling in the reference is incorrect, the data given in the reference was normalized to the number of atoms in a molecule. These have been fixed.
Added data for LiSi.
Added stress-strain and S-N data for Ti Grade 4.

Version 9.39 (12,762 materials, 106,999 datasets & 23,391 RT values)

The elastic modulus of 7049 Al was incorrect and has been fixed.
Replaced the data for the thermal conductivity for Cu-based alloys C24000 and C51100 with a new reference, the values changed by up to 10% and 25% respectively.
Added data for: Nitronic 32, Nitronic 33, several tool steels, Cu-based alloys, commercial purity Ti, 4340, Inconel 600, 304, 304L, 314, 316, 316 H, 316 Ti, 416, 446, 15-5 PH, and several Hastelloys.
Added data for several ECTFE, polypropylenes, PPS and PPE/PP, PPE/PS & PPO/PP polymers blends.
Added data for LiCoO₂, Li₂₂Si₅, Li₁₃Si₄, Li₇Si₃ and Li₁₂Si₇.
Added new references for H11 and H11 mod tool steels. For H11, the thermal data changed by up to 10% from previous values. For H11 mod the elastic properties changed by up to 5%, mainly at elevated temperatures.

Version 9.37 (12,298 materials, 101,698 datasets & 17,593 RT values)

The relative permittivity of sapphire was incorrect and have been fixed.
Replaced the data for the thermal expansion for cobalt with a new reference, the values changed by up to 20%.
The data for the thermal expansion for S20103, S20153, S21800 has been replaced. The original reference had the materials mis-labeled.
Added data for the following polymers: polycarbonates, polyamides, PPE, ULTEM, Xenoy, NORYL, Amodel, Meldin, Torlon, Ixef, PEEK and KetaSpire.
Added data for PCBs from Rogers and TACONIC.
Added creep data for: S20910, AM-355, 15-7 Mo PH, 201LN, 422, Ti-140A, C-130AM, HM21 and HK31.
Added strength data for: 304, 316, 316LN, Ti-155A, 52100, 440C, T1, T5, M1, M2, M10, Al 1000, Al 2024, Al 6013, 1010 steel, 201L, 2304, 403 and 403Nb.

Version 9.35 (11,901 materials, 96,767 datasets & 10,332 RT values)

Single point values at room temperature are being added to fill-in some of the missing property data. This data is marked by an asterisk '*' on the web site listing of properties and in the UI. An "(RT)" symbol is also displayed in the UI for this single point data.
Added data for: Haynes 282, 20Cb-3, K63017, 21Cr-6Ni-9Mn, 420, 431, 201, 13-8 Mo PH, MP35N, BioDur 108, Custom 450, Custom 455, Temperature compensator 32 (type 1), Chrome core 8-FM, Chrome core 8-XP, Hiperco 27 alloy, Hiperco 50A alloy, Hiperco 50 alloy, Hiperco 50 HS alloy, Hiperco 15 alloy, Manganin alloy 13.
Added data for several engineering plastics.

Version 9.33 (11,720 materials & 94,056 datasets)

The data for the UTS, YS and % elongation for stainless steels 420 and 440C were incorrect. This data was removed from the database. New yield strength data for 420 was added.
Several epoxies and silicones were added.
Several tool steels and Fe-Cr alloys were added.
Additional data were added for the thermal expansion for several tool steels. In most cases the data changed by less than 3%. The following had changes of 5% to 10% near 20 °C and less at higher temperatures: D2, H12, M4, O1.
A new reference was used for the elastic modulus of M2, the new values are similar at 20 °C but are 30% higher at 600 °C.

Version 9.31 (11,566 materials & 93,227 datasets)

Some ANSYS database files had errors when imported into Workbench. This has been fixed.
Some diallyl (ortho-, iso-) phthalates (DAP & DAIP) were added.
Several epoxies and silicones were added.

Version 9.29 (10,953 materials & 91,112 datasets)

The strain-based fatigue data for the 14 following materials was in error: 617, P92, GH413, API-X100, 34CrNiMo6, AF1410, SAE J435 Grade 0050A, Alloy 709 (NF 709), Ductile Ni-Resist D-5S, SAE J435 Grade 0030, 8630, 4140, Inconel 617 (weld). The number of reversals was used instead of the number of cycles, the cycles in the database were too high by a factor of 2. They have been corrected.
The stress-based fatigue data for the 4 following materials was in error: API-X100 pipeline steel, ATI 332Mo, ATI 334Mo, AZ31B-H24. The number of reversals was used instead of the number of cycles, the cycles in the database were too high by a factor of 2. They have been corrected.
The specific heat and heat capacity for these materials were extended down to the 10K to 50K range: Al 7075, Inconel X-750, BeO, Cr₂O₃, CuO, Cu₂O, Fe₂O₃, Fe₃O₄, MnO, MnO₂, Mn₂O₃, NiO, NbO₂, Nb₂O₃, SiO₂ (cristobalite), SiO₂ (tridymite), SnO, SnO₂, TiO₂ (anatase), TiO₂ (rutile), ZnO. The room temperature values changed by 5% or less due to the new data.
Added additional references for the specific heat and heat capacity for: Al, Ti, Sn, Pb, Constantan. The room temperature values changed by 5% or less due to the new data.
Added additional references for the electrical resistivity for: Al and 310S stainless. The values changed by 5% or less due to the new data.
Added data for several Ohara glasses, Incoloy 865 and FORMGLAS.

Version 9.27 (10,790 materials & 90,085 datasets)

The thermal conductivity for Schott Borofloat 33 was too high by a factor of approximately 20. It has been corrected.
Added properties for several Corning and Schott glasses.

Version 9.25 (10,595 materials & 88,839 datasets)

The electrical resistivities for Pyrex, Vycor and window glass were too high by a factor of 100. It has been corrected.
Added dielectric properties for several Corning and Schott glasses.

Version 9.23 (10,590 materials & 88,823 datasets)

Fixed a bug when reading or appending to ANSYS data files. No data was affected.
Added several circuit boards and antenna substrates.
Data was added for: Inconel 702, Nimonic 901, 15Cr15Ni1MoTi, liquid H and He, and some Mylars.
Fixed a bug in the search/report function that would cause it to fail when dielectic properties were selected.

Version 9.21 (10,328 materials & 84,573 datasets)

Fixed a bug that caused the program to crash when writing ABAQUS formatted data for certain materials. No data was affected.
Data was added for: UNS S31266, LSHR disk alloy, Rene-41, Haynes 25 (L-605), S350, S420 and G500.
Fixed several minor UI bugs.

Version 9.19 (10,320 materials & 84,343 datasets)

The thermal conductivity for Kapton HN was incorrect, it was actually for the MT grade. This has been updated with the correct data.
Data has been added for several Cu-based alloys and several Nitronic alloys.
Data for Haynes 25 and L605 were combined as Haynes 25.
Data was added for: NILOMAG alloy 77, Ni-SPAN C alloy 902, Inconel 601, Inconel 625LCF, Incoloy 25-6HN, 316L, Inconel X-750, Super 304H (304HCu), Fe-2Mn-1.3Si-0.7Cr-0.4C, X100 pipeline steel, NiCrMo 2.5-IG filler wire, Ductile Ni-Resist D-5S, SiMo51 ductile iron (3.2 C - 4.5 Si - 1 Mo), SiMo1000 ductile iron.
Data was added for Al-based alloys: 1085, 6016, 6110, 7075.
Data was added for Mg-based alloys: ZK10, ZN10, ZX10.
Data was added for Zr-based alloys: Zr-1Nb, Zr-2.5Nb.

Version 9.17 (10,297 materials & 82,253 datasets)

The compressive stress-strain curves for Ta, Ta-2.5W, Ta-5W, Ta-10W were incorrect and have been fixed.
Two new magnetic properties were added: magnetic core loss versus flux density and magnetic exciting power versus flux density.
Several electrical steels were added.
Several iron-base alloys, nickel-base alloys, titanium-base alloys, magnesium-base alloys and aluminum-base alloys were added.
The units window was made resizable for better compatibility with smaller screen sizes.

Version 9.15 (10,071 materials & 79,859 datasets)

UNS C72900 was mislabeled as UNS C72700.
Amodel AFA-6133 VO Z was mislabeled as Amodel AFA-6100 VO Z.
The stress-rupture data for Nimonic 901 "bar material" was incorrect and was removed. It was for a different material.
The stress-rupture data for 314 stainless was replaced with data from a new reference.
The expansion data for NOVADURAN 5010R5 & 5010G30 were replaced with data from a different reference. The original reference seemed incorrect. The new data for 5010R5 is approximately 15% lower than the previous data. The new data for 5010G30 is approximately 5% to 10% lower than the previous data.
The material lists were rearranged.
Two new properties were added: relative permittivity (or dielectric constant) and the dissipation factor (or tan delta).
Data was added for: Mo, Nb, Ni, Ta, Nimonic 75, Nimonic86, Nimonic91, Nimonic PE13, IN-100, IN-519, Inconel 713C, Inconel MA 6000, TZC, Nichrome, several W-base, Nb-base and Mo-base alloys.
Thermal conductivity and expansion data was added for several Cu-base alloys.
Data was added for the following Fe-based alloys: 1030, 2315, CA6NM, CA15, CB7Cu-1, CB7Cu-2, CD4MCu, CE30, CF3, CF3M, CF8, CF8C, CF8M, CF12M, CF16F, CF20, CG8M, CH20, CK20, CN7M, CX2MW, CY40, HG10MnN.
Data for Ni-Al bronze combined with the data for UNS C63000.
Data for the following polymers was added: Polylactic acids (PLA), Ultradurs, Polybutylenes (PBT), Polypropylenes, Acetals (POM), cellulose acetate butyrate (CAB), PVC, Tefzel ETFE, ABS, TPU (Elastollan).

Version 9.09 (9,628 materials & 76,225 datasets)

Added data for 301, 306, S-816, Custom Age 625 Plus, AF1410, V-50Ti-5Al, V-40Ti-5Al, V-50Ti-10Cr, V-50Ti-5Cr, V-50Ti-15Cr, W - 20 Ta - 12 Mo, Pt-Au, Pt-Au-Rh.
Refit several viscosity datasets to the Arrhenius equation for better extrapolation.
Added data for the following liquid metal alloys: Ag-Al-Cu, Sn-Ti, Sn-Zr, Sn-Sb-Cu, Cu-Al, Cu-Si, Hg-In, In-Sn, In-Pb, Au-Sn, Co, In, Hg, Si, Tl, Ce, Nd, Pr, Tb, Gd, Dy, Yb, Er, Dy, Sr, Ca, Bi, Hf.
Fixed a bug that would prevent the main window being shown when the program was closed when it was minimized to the taskbar.

Version 9.07 (9,462 materials & 75,547 datasets)

Added a new reference for the thermal conductivity of MACOR, the existing data changed by about 5%.
Fixed a bug that could crash the program when deleting a user material.
Added a new property "Specific volume".
Added history to "Quick search". Right-click in the search box to show a pop-up list of previous searches.
Added data for the following precious metal alloys: Ru, Pt-10Rh, Pt-12Rh, Pt-20Rh, Pt-40Rh, AuMn, Au₃Mn, Pt - 15 Rh - 5 Ru, Pt - 15 Rh - 5 Cr, Pt - 15 Rh - 10 Cr, Ni-Pd alloys, Ni-Rh alloys, Ni-Ru alloys, Pt & Pd alloys.
Added data for the following Ti alloys: Stellite 21, Ti Grade 4, Ti - 5 Al - 2.5 Sn (Grade 6), C-110M, Nb-Ti alloys.
Added data for the following Fe and Ni alloys: 19-9 DX, Monel 400, 301, 321, S-590, Fe-20 Mn-10 Al-Cr-C, API X80, Maraging 350, Multimet (N-155), Fe - 3 Si, Vacoflux 48, Vacodur 49, Vacodur S Plus.
Added data for the following Al and Mg alloys: 2117, Al - Si liquid alloys, Mg - 4Li, Mg - 3.8 Li - 6 Al, Mg - 9.5 Li - 6 Al, Mg - 16 Li - 6 Al, Mg - 3.5 Li - 1 Al.
Added data for the following elements: In, Tl, Ru.
Added data for the following ploymers: Ultramid B3WG12 HSP, Zenite 6130L, AMODEL A-1133 HS, Halar 300, TECHNYL A218 V30 Natural, Polyamide tape (Kapton HN), Torlon, several Zytels, several Vespels, several Minlons, several NOVADURANs, several Iupilons, several lupiaces, several Rynites, several AvaSpires, several Hyflons, several PEEKs.
Added data for Lexan 101 and refit the thermal expansion, dL/L increased by 5%.
Added data for the following oxides: Dy₂TiO₅, Er₂TiO₅, Gd₂TiO₅, Ho₂TiO₅, Lu₂TiO₅, Y₂TiO₅, La₂TiO₅, Nd₂TiO₅.
Added HgCr₂Se₄.

Version 9.05 (9,358 materials & 72,691 datasets)

Fixed bug that would crash the program when creating an Ansys/SolidWorks database.
Added data for: Inconel X-750, AerMet 100, AM-355, FMDP pipeline steel, API-X70 pipeline steel, Incoloy A-286, 304, A9, 17-7 PH, 10B46, several Ti-based alloys, Pb - 55 Bi (eutectic), Zr₅₀Cu₄₀Ag₁₀.
Data for N08330 was removed and combined with Incoloy 330.
Added apparent viscosity for several polymers.
The expansion of aluminum was extended down to 10K with a new reference. The CTE value near 20K changed substantially, the others (dL/L and MTE) were only slightly affected.
Added data for: rare-earth trifluorides, Dy₂WO₆, Gd₂WO₆, Er₆WO₁₂, Ho₆WO₁₂, Y₂W₃O₁₂, Yb₆WO₁₂.
Added the ability of controlling how stresses and lengths are displayed in the labels and notes. These new options are available in the "Output Options" dialog window.

Version 9.03 (9,328 materials & 71,537 datasets)

The expansion data for HfTiO₄ and ZrTiO₄ was changed to a new reference with the expansion in different crystallographic directions.
Added new materials: Inconel 718SPF, UNS N06333 and several cast irons.
Added new materials: TaN, Schott Borofloat 33, spider silk and wheat.
Added specific heat data for many salts, borides, carbides, nitrides and other non-metallic materials.
Fixed some bugs in the search by composition routine. Some materials were being missed.
Made some minor changes to the appearance of the UI.

Version 9.01 (9,259 materials & 70,613 datasets)

The heat capacity data for diamond was incorrect and has been updated. The specific heat data is not affected by this error.
Refit the thermal expansion data for Alloy 39, there was a significant change in the values.
The thermal expansion data for: Hastalloy B, Hastalloy C, several Monels, Inconel X-750 Inconel HX, Alloy 72 and Alloy 22-3 has been changed, the new values differ by 5-10%.
The data for Ta₂O₃ is actually for Ta₂O₅. The name of the material has been updated.
Added several new precious metal alloys: CuPd, Cu-Pt, Au-Pd, Au-Ag, Ag-Cu, Au-Cu, Au-Pt, Ag-Cd, Au-Ag, Ag-Pd, Ag-Mg, Ag-Mn, Ag-Pt, Pt-Fe, Pd-Ag, Pt-Au and Pt-Cu-Co.
Added several new refractory metal alloys: Cr-based, Ti-Ge, Ti-Cu, Ti-Nb, Ti-Sn, Ti-Zn, Zr-0.14Hf, Zr-1Hf and Zr-1Hf-1Ta.
Added thermal expansion data for TRIP 700, TRIP 1000, ALCHROME alloy DK, Stellite 23, Stellite 30, W - 20 Cu, W - 40 Cu, W - 7 Ni - 2.5 Cu, Al-7Si, Al-13Si, Al-17Si, AZ81, EK30, HK31, HZ32, CuAu₃, Cu₃Au, 44 Pd - 33 Ni - 23 Cr (GE-76 brazing alloy) and Alloy 19-2.
Added new materials: TD-NiCr, Fe-Si alloys, Nimonic 100, 30 Co - 23 Fe - 21 Cr - 20 Ni,Mg - 7 Al - 1 Si, Sn-Mg binary alloys and Zn-Cu binary alloys.
Added several foods: honey, orange juice, grape juice, apple puree, pear puree, peach puree. Foods were also put into their own group.
The semi-conductors & optical materials group was moved to a new tab.
Added data for several oxides, silicates and electro-ceramics.
Added data for: Controlled expansion 45, Temp compensator 30 (types 2, 3, 4), 1065, 1095 and Kovar.
Added data for: 7068, several Cu alloys, AZ81, HM31, ZK60 and Au₂Mn.

Version 8.99 (9,008 materials & 69,433 datasets)

Removed data for elastic modulus MP35N since it was inconsistent.
The thermal conductivity of liquid LiNO₃, NaNO₃, KNO₃, NaBr, KBr, RbBr, LiCl, NaCl, KCl, RbCl, CsCl, NaI, RbI was changed to new reference.
Added data for: A36, 1035, 1080, 1110, 4340, 302, 304, 304L, 310, 316, 316L, 347, 348, 410, Monel 400, Inconel 600, Inconel 617, Inconel 702, Inconel 740/Inconel 740H, Inconel 706, Incoloy 903, AD730, S20910, HY-80, HY-130, Nitronic 40, HP 9-4-30, UNS S44627 (E-BRITE), A881/A881M rebar, TRIP 1000, UNS S40977 (3Cr12), 422M, 19-9 DL, several grades of rebar, A533 Grade B, Alloy 709 (NF 709), Incoloy 800, AL-6XN, Maraging 300 (C-type), H11, Nitronic 40 (21-6-9), MP159, Nickel TD, HP 9-4-25, AFC-260, MP35N, Unitemp AF2-1 DA, Udimet 700, Udimet 710, 14-8 Mo PH, 15-5 PH, 17-4 PH, 17-7PH, Custom 450.
Added data for: Ti-8Mo-8V-2Fe-3Al, Ti-6Al-6V-2Sn, Ti-6Al-2Zr-2Sn-2Mo-2Cr, Ti-6Al-4Zr-2Sn-2Mo, Ti-6Al-2Sn-4Zr-6Mo, Ti-6Al-2Nb-1Ta-1Mo, Ti-15V-3Cr-3Al-3Sn, Ti-4.5Al-5Mo-1.5Cr, Ti-6Al-4V, 5621-S (Ti-5Al-6Sn-2Zr), RMI 38-6-44, Zircaloy-2, Cu OFHC, Cu OFHC, C11000.
Added data for: Zr, Mo, Be.
Added data for: 2048, 2214, 2419, 6061, 7049, 7050, 7068, 7074, 7075, 7175, 7475, 201.0, 244.0, A206.0, C355.0, AlBeMet 162.
Added data for: Roses/Wood's metal, Diamond, Corning 9754 glass, quartz, H₂O (water ice), MgO
Added data for: AZ31A, AZ61A, AZ80A, HK31, WE43, Elektron 21 & 43, HM21
Added data for: Zn alloys: 2, 3, 5, 7, ZA-8, ZA-12, ZA-27, Kirksite A.

Version 8.97 (8,972 materials & 67,138 datasets)

Several bugs were fixed in the routine for adding properties for use in ANSYS, SolidWorks and ABAQUS. Data was not affected only performance and UI issues were addressed.
Added the following materials: Ti - 6 Al - 4 V ELI, Grade 23, ATI 332Mo, ATI 334Mo, ATI 20-25+Nb, ATI 425, Grade 38 (R54250), 433.
Added additional data for: 13-8 Mo PH, 15-7 Mo PH, 17-4 PH, 441, 310, 348, 409HP (S40930), 410S UNS S41008, 433, Ta-10W.
Elastic modulus of 13-8 Mo PH was added to and refit. Values changed by less than 5%.
Thermal expansion data for 301 and 302 was added to. Values changed by less than 5%.
Thermal expansion for 347 was added to. Largest changes were in the MTE near room temperature.

Version 8.95 (8,959 materials & 66,940 datasets)

The reference for the expansion of 2205 steel was changed. The new values are 5% to 10% higher than the old values.
Added creep data for the following aluminum-based alloys: 1100, 2011, 2014, 2017, 2018, 2020, 2021, 2024, 2124, 2218, 2219, 2618, 3003, 3004, 5005, 5050, 5052, 5056, 5154, 5456, 6061, 6063, 6101, 6201, 6262, 7005, 7050, 7075, 7079, 7178, 7475, 201.0, 224.0, A240.0, 242.0, 249.0, 295.0, A444.0 (A344.0), 354.0, 355.0, A355.0, C355.0, 356.0, A356.0, 360.0, 380.0, B443.0.
Added creep data for the following alloys: Inconel/Hastelloy X, Inconel 625, Inconel 700, Inconel 713C, Nimonic 80A, Nimonic 90, Nimonic PE16, Nimonic PK33, Nimonic 263, Hastelloy S, Haynes 214, Haynes 230, Haynes 263, Udimet 500, 718 Plus, IN-738, M252, Haynes 25, Haynes 188, Thermo-Span alloy, C83600, C90500, Ni-Al Bronze, EZ33, ZE41 RZ5, QE22 (MSR-B), EQ21, Ti - 6 Al - 4 V, H11 mod (AISI 610).
Added fatigue data for: 301, 15-7 Mo PH, AM-350, Ti-6Al-4V, Ti-8Al-1Mo-1V.
Added data for: AL6XN, W-5Ni-2Fe, WSi₂, MoSe₂, WSe₂.
Added the following materials: CMSX-4 Plus (SLS), LEK94, CMSX-10, Cu-8Al, Cu-26Cr, Cu-8Cr-1Al, Cu-17Al-5Al, Cu-23Cr-5Al, P355N, P355NH, P355NL1, P355NL2, 15-15HS, AerMet 340, CarTech ACUBE 100, Hypocore alloy, MagneDur 20-4 alloy, H19, CBS-223 VIM-VAR, CarTech No. 1 JR alloy type 1, 2, 4, Ti - 6 Al - 4 V, Grade 5, Graphite GCMB.
Added the ability to use "NA()" in Microsoft Excel for the out-of-range value.

Version 8.93 (8,928 materials & 57,926 datasets)

Fixed a bug introduced in v8.91 where you could not select the Excel cell for the x variable with your mouse.

Version 8.91 (8,928 materials & 57,870 datasets)

The stress-strain and % elongation data for magnesium alloy WE54 were incorrect and have been corrected.
The stress-strain curves in compression for the following materials were re-fit near 0 strain to get better internal consistency. Values at higher strain levels are unchanged: Inconel 718, Ti, 4140, 300M, AerMet 100, AF1410, 304L, 304LN, 10 wt% Cr (similar to 422, slightly lower C and Cr), 2507, Incoloy A-286, TRIP 980, Inconel MA-754, Rene 95, Nimonic 105, IN-939, 7A85, NiAl, Ti₃Al (Ti - 24 Al - 20 Nb).
The data for Inconel C-276 and Hastelloy C-276 were combined and Hastelloy C-276 was removed.
Data curves for stress-strain in compression were added for: Waspaloy, Haynes Ultimet, Haynes 230, Inconel C-276.
Removed the BASIC output format and replaced it with C#.
The Larson-Miller data can now be output to work in terms of the LMP or time & temperature. You can select which inputs to use under the "Output options" dialog.

Version 8.89 (8,929 materials & 57,689 datasets)

Fixed a bug in the Linux version where a library was not found.
Added creep data for 2.25Cr-1Mo.
Added true stress-strain data in compression for HyMu 80 alloy (Permalloy 80), 6063, 6009, 3004, 7050, Al-1.5 Cu, Chromium steel (12.25 wt%), Inconel 600, Ti-6Al-4V ELI grade, Haynes 188, Monel K-500 and Inconel 625.
Changed to a new reference for the thermal diffusivity of CMSX-4, the new values are about 10% higher.

Version 8.87 (8,927 materials & 57,362 datasets)

The master curve for the creep strength of 304 stainless was incorrect and has been updated.
The test temperatures for the stress-rupture data for "Inconel 600 - solution treated" were incorrect and have been fixed.
The master curve for the creep strength of "Maraging 250 (C-type) at 0.5%" was incorrect and has been removed.
The stress-rupture data for UNS C90500 was incorrect and has been removed.
Added isochronous creep data.

Version 8.83 (8,927 materials & 56,763 datasets)

Fixed bug that would cause the program to crash when writing data to a file.
Added S-N fatigue data for: 4140, 51SiCr7, 1008, 1020, 1040, 2315, 2330, 4330V, 8630, 8640, HY-TUF, Super HY-TUF, H23, Stellite 31, ZK60, AZ81, maple, birch.
Added more data for molten salts.

Version 8.81 (8,923 materials & 54,274 datasets)

Added more data for molten salts.
Added data for: DIROS 500 S, P500QL2, P690Q, A537 (S185), AerMet 100, AF1410, 1008, 1020, 1040, 4135, 4037, 5140, 9310, 1080, 4130, 300M, glassy Se.
Rearranged the tabs and material lists on the tabs.

Version 8.79 (3,553 materials & 31,637 datasets)

Added data for hydrocarbons and molten salts.

Version 8.77 (3,430 materials & 30,788 datasets)

Fixed a bug that prevented some database files being written.

Version 8.75 (3,430 materials & 30,788 datasets)

Added surface tension as a new property.
Added the ability to plot data as an Arrhenius plot.
Added data for Invar, Nb-1Zr, several edible oils and several refrigerants.

Version 8.73 (3,408 materials & 30,570 datasets)

Fixed a bug introduced in v8.71 where the SOLIDWORKS/ANSYS database creation window would not display.
Fixed a bug where some of the default colors used were unusual.

Version 8.71 (3,408 materials & 30,570 datasets)

The reference for the vapor pressure of iron was in error and was changed.
The elastic properties of copper were extended from 300K to 1330K.
Additional data was added for Invar, Ta, Nb-10W-5Zr, 304 and 1018.
A splash screen was added to the Windows version. You can enable/disable it in the "Options" menu.

Version 8.69 (3,408 materials & 30,541 datasets)

The reference for the thermal expansion of TZM was changed. The new values are 50% higher near room temperature and 10% higher at elevated temperatures.
Added data for: Ti-1555A, Ti-150A, Ti-140A, C-130AM, AM60B and Inconel 617 welds.
Added data for four acrylics, PLEXIGLAS G, PLEXIGLAS MC, Perspex-CQ, Acrylite OP-1 and Solacryl 2750. The expansion data for the "PMMA" was changed to be the average of these new acrylics.
Added a colored indicator bar. When this is green you have selected a set of consistent units for the proprieties, when this is red the units are not consistent. You can show/hide this under the "Option" menu.

Version 8.67 (3,402 materials & 30,504 datasets)

The reference "E.P. Papadakis, Materials Science and Engineering, v10, p195 (1972)" was used for the expansion of several materials. This reference was been replaced with new references for the affected materials: 317/317L, FS-85 (Nb-28Ta-10W-1Zr), Cb-752 (Nb-10W-2.5Zr), Inconel 700, ZrSiO₄.
Added data for: Pt-10Rh, Pt-20Rh , P91, P92, 9 Cr - 1 Mo - V - Nb (T91), Ferritic ductile iron (3.3 C - 3.25 Si - 0.13 Mn - 0.002 Ce), Inconel 617, 38MnVS & 25MnCrVS, ZrN, P4M, HT7, 5754, Cu, W-5Ni-2Fe, Nb-10Ti-5Zr, Nb-10W-5Zr, Nb-5Mo-5V-1Zr, Nb - 15 W - 5 Mo - 1 Zr.
Added single temperature output for ABAQUS.

Version 8.63 (3,365 materials & 30,223 datasets)

The elastic properties for Ti-6Al-4V and Inconel 718 were refit. The largest change was in the Poisson's ratio. For 718 the changes were a few percent. For Ti-6Al-4V the change was approximately 15% near room temperature and close to 0 at 930 °C.
Added engineering stress-strain and creep modulus data for several polymers.
Data was added for RAFM steel (9Cr-1W), 304L weld metal, CMSX-4, CMSX-10, Thermo-Span alloy, PWA 1485, SRR99, MAR M247, Rene 94.

Version 8.61 (3,347 materials & 29,823 datasets)

Added engineering stress-strain data for several polymers.
Data was added for H13, Zn-48Sb, Modified 9Cr-1Mo, A316, 5115 steel, API X60 steel, Mg-4Li, CRONIDUR 30, 409 wire.

Version 8.59 (3,284 materials & 28,789 datasets)

The thermal conductivity for 304 stainless steel above room temperature was revised. Data from a new reference was added. The new values are the same as the old values near 20 °C but are 35% lower at 600 °C.
The thermal conductivity for 316 stainless steel above room temperature was revised. Data from a new reference was added. The new values are within 5% of the old values at all temperatures.
Data was added for several Kynar grades 460, 710, 720, 740, 760 and for Pebax.
Data was added for E glass and S-2 glass fibers and for MgB₂.
Data was added for C18150, ZEK100, CMSX-4, NARloy-Z, GRCop-84, Cu-4Cr-2Nb, Fe-22Mn, Fe-24Mn, API X80, 1144 and 4142 alloys.
Data was added for Bi₂Te₃ (n- and p-type).

Version 8.57 (3,266 materials & 28,574 datasets)

The density for H₂, He, N₂, O₂, F₂, Ne, Cl₂, Ar, Kr, Xe, Rn in the gas phase was too high by 7%.
Added stress-rupture data 316LN, E911 and F82H.

Version 8.55 (3,265 materials & 28,552 datasets)

Added data for Nb-Zr allors, Inconel 783, Pyrowear 53, Ferrium C61 & C64, 1045, DP 980, 718 Plus, Datalloy 2, Staballoy AG17, ductile iron 80-55-06.
Added data for PEEK, oil sands, Apiezon greases & waxes.
Added data for PbF₂, SrF₂, CdF₂, LaF₃, Dy₂Ce₂O₇, DyB₆, LuB₆, YbInCu₄, Bi₂TeO₅.
Added data for dairy products and orange juice.

Version 8.53 (3,226 materials & 28,415 datasets)

The expansion data for Haynes 242 was refit with additional data added.
Data was added for Haynes 244, Inconel 783, Waspaloy, Alloy 901, Inconel 718, Ti-5.3Al-3Mo-1.5V, Ti-6Al-4V and TRIP 980.
Data was added for Al-Zn, Bi-Sn, Sn-Zn, Cu-Sn, Ag-Sn eutectic liquids.
LiPb and Li₁₇Pb₈₃ were added.
The program will check for updates every 30 days. If a new version is available, you will be prompted to download the new version. You can turn this off under the "Help" menu.

Version 8.51 (3,220 materials & 28,298 datasets)

The stress-rupture data for Super 304H was in error. It has been corrected and added to.
Added compression stress-strain data for 304LN and 304HCu stainless steels.
Added data for a RAFM steel (9Cr-1W).

Version 8.49 (3,220 materials & 27,721 datasets)

The Linux version is now built on a machine running 64-bit Ubuntu 16.04 LTS.
Added data for several types of engineering polymers: ECTFE (polyethylene chlorotrifluoroethylene), polyaryletherketone (PAEK) and polyvinylidene fluoride (PVDF).

Version 8.47 (3,140 materials & 27,698 datasets)

Fixed bug where the function that reports the data at a single temperature would return incorrect values under certain circumstances.
The data for thermal expansion of Zerodur at temperatures above 293 K were incorrect.
Added magnetic data for HyMu 80 alloy, HyMu 800 alloy, CSS-42L VIM-VAR, Silicon core iron A-FM, Silicon core iron B, Silicon core iron B-FM, Silicon core iron C.
Added additional data for 1.567, 1.4828, 403, S-816, C17410, C17460, C71500, C72700, C96970, several solders, 15-5PH, HM11, ZK51, CsBr, L-605.

Version 8.45 (3,111 materials & 27,263 datasets)

Fixed several bugs in the user material part of the database. Some of the controls for specifying the units were not being displayed properly.
Fixed several bugs in the plotting routines. Specifically, when switching back-and-forth from log to linear axis.

Version 8.41 (3,111 materials & 27,263 datasets)

The specific heat data for 718 Plus was off by a factor of 4.148.
The thermal conductivity of NbC was too high by a factor of 100.
A new reference for the expansion of Al 5754 was used, the values changed by approximately 3%.
Additional data for the expansion of H10 was added, the values changed by approximately 5%.
New references for the specific heat of Rene-41, 17-4 and 420 were used. The new data fits with other similar alloys better than the data from the previous references. The data below about 300 °C for 17-4 PH and 420 and below 500 °C for Rene-41 is significantly different.
An additional reference for the expansion data for Astroloy was added and the data was refitted. The data below 300 °C differs by approximately 4%.
150 new materials and 1300 new data sets have been added.
The flexural modulus, flexural strength and apparent viscosity were added to the database as new properties.

Version 8.37 (2,962 materials & 25,964 datasets)

The tensile data for 416 stainless was incorrect. The data was for the tempering temperature not the test temperature. The data has been replaced with the correct values.
The tensile data for 17-4 PH stainless (only condition H1100) was replaced with a new data source. The previous source is believed to be incorrect.
Data was added for 718 Plus, Invar, 17-4 PH, 301, 321, 347 and 9 Ni steel.

Version 8.35 (2,962 materials & 25,900 datasets)

Added Custom Age 625 Plus and Inconel 718 Plus.
Added s-N fatigue data for cast iron 80-55-06 and A356.0, expansion data for Mo-35V and Mo-29Ti alloys, stress-strain curves for Au-5Pd-2Ni braze foil, thermal conductivity for Inconel 702 and 347 stainless.
Added ability to output the data at a single temperature.
Added search by AISI, ASTM, SAE and AMS numbers.
Added the ability to change the plot line thickness, set the data curve color, set the plot background gray, display dashed or solid grid lines, extend the grid line into the plot for log plots and display a note on certain plots. The note will usually contain either the test temperature or the reference temperature. The commands in some of the plot menus were rearranged.
Added themes so the UI colors can be changed. Use the "Options->Colors..." menu item for this.
Added an "exclude" option in the composition search. This will exclude materials with any level of the selected alloying element.

Version 8.31 (2,942 materials & 25,804 datasets)

The data for the tensile strength of Minlon 20B at 50% RH was in error.
For steels 2304, 2507, S32304, S32750 an additional reference was added for the elastic modulus resulting in the values changing by 0 to 5%.
For M2 steel an additional reference was added for the expansion resulting in the values changing by 0 to 2%.
Fixed bug where some plot options were not set correctly.
Added data for Petra 140 BK-112, Lexan 101, Celacex 1600A, Pro-fax 6823 and ULTEM PEI resins.
Added data for 1070, TRIP 800, P91, ASME P23, T23 steels, ductile iron 80-55-06 (NE-GJS-600) and 2101 duplex stainless.
Added data for 2024 Al.
The stress-strain data for Inconel 718 was extended down to 0 strain and data for different strain rates was added.
Data was added for the following Cr steels: 1.4037 (X65Cr13), 1.4122 (X39CrMo17-1), 1.4742 (X10CrAlSi18), 1.4910 (X3CrNiMoBN17-13-3), 1.3964 (X2CrNiMnMoNNb21-16-5-3), 430F.
Data for several electronic potting materials was added.
Each dataset now has a unique identifier. This is output in the note field and will help to find the same data if the naming changes, as it does from time-to-time. You can search for the unique ID in the text search.
The material tabs in the main startup window were rearranged to a more logical order.
The data output was moved to a tab so save space on smaller laptop screens. There is now a menu option to switch to a specific tab when displaying or plotting data.
The text search and composition searches were moved to separate windows. There are separate toolbar icons for these searches. In the text search you can now search the references.
If you right-click in a material list box a menu will pop-up where you can list all materials with a specific property.

Version 8.27 (2,909 materials & 25,583 datasets)

Data was added for Dupont Crastin, Hytrel, Minlon, Rynite, Zenite and Zytel resins.
Data was added for Elf Atochem KYNAR resins.
The database now has over 2,900 materials and over 25,000 datasets.

Version 8.25 (2,845 materials & 24,901 datasets)

Data was added for Dupont Delrin resins. The reference for the Delrins was changed which resulted in some of the existing data changing slightly.
Fixed a bug introduced in v8.23 which prevented the creation of ANSYS WorkBench 10 & 11 data files.

Version 8.23 (2,845 materials & 24,692 datasets)

No data was added or changed. This release only has usability improvements.
Materials now can be appended to an existing ANSYS WorkBench database.
In the search by composition window the dropdown element lists have been changed to pop-up windows for better space utilization.
The selected units are now highlighted with color for easier visibility. The highlight color can be changed or turned on/off using the "Options->Colors..." menu item.
In the "Search/Report" window you can right-click on a material in the results table to go to that material in the main program.
Added splitters to the "Search/Report" and "User mat" windows to resize the window contents.
When building an ANSYS or SOLIDWORKS database the data is always written to the database file in units defined by ANSYS or SOLIDWORKS, regardless of the units the user has selected. You can now check an option to display the data in the units ANSYS or SOLIDWORKS uses without having to change your units.

Version 8.21 (2,845 materials & 24,692 datasets)

Added data for: Alloy D9, A319, MAR-M247, GRCop-84.
For some materials the eN fatigue data was incorrectly entered into the database as reversals versus strain, instead of cycles versus strain. These materials are: 26NiCrMoV14-5, GP91, A537, 316LN, ASTM A289, A723, 304LN, 28CrMoV5-8, Incoloy 864, 321. These have all been fixed.
For Al-3 wt% Ti the SN fatigue data was incorrectly entered into the database as reversals versus stress, instead of cycles versus stress. This has been fixed.
Added "resize window height" menu command to the properties window. This will fit the window to your screen height. This helps on some laptops.
Some bugs in setting the y-axis in the plots were fixed.

Version 8.19 (2,844 materials & 24,667 datasets)

Added data for: 9310, 304LN, 201, Inconel 803, Inconel 864, Inconel 718, Ferrium C64, Ferrium M54, AerMet 100, Al₂TiO₅, sulfur, NaBr.
Made SearchReport window better for small screens by adding a splitter control.
Changed the layout order of properties in the UI.
Cleaned up many of the data labels in the UI and information in the note field.

Version 8.13 (2,841 materials & 24,577 datasets)

Added data for: 5132, 9310, Ferrium C61 (AMS 6517), Ferrium S53.
The specific heat data for Hastelloy C-2000 was 1000x too large due to a units conversion error.
The thermal conductivity data for Incoloy 27-7MO was 100x too small due to a units conversion error.
The thermal conductivity data for H₂O₂ was incorrect.
Some of the stress-rupture data for Inconel 718 was labeled with the incorrect test temperature.
Some of the stress-rupture and creep strength data for 13-8 Mo PH were labeled with the incorrect test temperature.

Version 8.11 (2,840 materials & 24,564 datasets)

Added data for: P91, TRIP 700, 52100, 9310, 304, 304LN, Inconel 700, Inconel G-3, Haynes 188, TWIP 8 Mn, TWIP 17 Mn, C18150, C61300, scandium, osmium.
Added the strain type to the y-axis labeling for e-N fatigue plots.
The stress type for the S-N fatigue data for PWA 1480 was corrected to maximum stress from mean stress.

Version 8.09 (2,836 materials & 24,412 datasets)

Added data for: 1040 steel, P92, 17-4 PH, IN-939, BS 460B steel reinforcing bars, BS B500B steel reinforcing bars, A182 Grade F1 (Ravne No. 760), A537 (S185), 28CrMoV5-8, VM12-SHC (ASME Code Case 2781), JIS G 4801 SUP12, 52100, 6150, G4802 SK5-CSP, ASTM A723, C36000, C26000, copper foil, silicon, SMn443, PMMA, BK7, GaS.
The thermal expansion of 17-22A, 17-22AS and 1722-AV was 6% too high.
Added option to fix the minimum of the plot y-axis to 0.
Fixed fixed bug creating xml data files from user materials with single point data, only 2 points and the temperature increment is less than 5 K.

Version 8.07 (2,824 materials & 24,220 datasets)

Fixed error error in 1 dataset of the e-N fatigue for 304 stainless. At low cycles there is no error, at high cycles the strain is too high by a factor of 2.

Version 8.05 (2,824 materials & 24,220 datasets)

Added data for: L-605, Haynes 25, P9, P91, Modified 9Cr-1Mo steel, CaCO₃.

Version 8.01 (2,823 materials & 24,196 datasets)

Added data for: A380, Ti-4Al-3Mo-1V, Ti-6Al-4V, AZ31, ZK60, C22000, C23000, C26000, Sn-Zn-Ga alloys.
Added user fields to user materials (see Working_with_User_Materials.pdf).
Fixed bug in reading SolidWorks/ANSYS xml files.

Version 7.99 (2,817 materials & 24,129 datasets)

1Cr-0.5Mo steel, H11, Modified 9Cr-1Mo steel, 316LN, Al-Li alloys, Zn-Li alloys, heavy alloys W-Ni-Fe-Cu, PEEK (polyetheretherketone), C/C SiC composite, LaMnO₃, La_0.825Sr_0.175MnO₃, La_0.3Sr_0.7MnO₃, Ga₂Mg₅, Tl₂Mg₅, olive oil, apple pulp, tomato paste, meat, starch, sodium caseinate.
Extended the thermal expansion of 316 up to 1000 °C, the existing data was changed by less than 2%.

Version 7.97 (2,791 materials & 24,008 datasets)

Added data for: 7075, Waspaloy, HfN, HfN, TiN, ZrN, HfC, NbC, Mo₂C, WC, SrO, Ta₂O₃, Sc₂O₃, Lu₂O₃, Tm₂O₃, Gd₂O₃, Sm₂O₃, CeO₂, Be₃N₂, Ca₃N₂, C₅H₁₂.

Version 7.95 (2,786 materials & 23,940 datasets)

Fixed several bugs in the plots.

Version 7.93 (2,786 materials & 23,940 datasets)

Added data for: 17wt% Mn TWIP steel, Inconel 625.
Added 3 column for ANSYS elastic modulus output.
Added black/white background option for plots.
Added font size option for plots.
Allow the plot axis to be resized by either the mouse wheel or via a dialog.
Fixed spurious warning bug in search by name routine.
Added a text search field to the main toolbar.

Version 7.91 (2,786 materials & 23,916 datasets)

Added data for: 2507 (S32750), S32053, ASTM B625 (N08031), UNS N08354, 26NiCrMoV14-5, 18Mn18Cr (ASTM A289), IN-939, NAS NM15M, NAS NM17, Corning 1737, Corning Eagle 2000, Corning Eagle XG, Corning Lotus, Corning Lotus XT, Pyroceram 9606, SiO₂-TiO₂.
Changed the reference for the thermal expansion of 2205, the data changed slightly.
Added JIS numbers for the alloys.
Fixed a bug that would cause the program to crash when making a plot.

Version 7.89 (2,785 materials & 23,815 datasets)

Fixed some bugs in the search by composition routine.

Version 7.87 (2,765 materials & 23,815 datasets)

In the search by composition, if the min/max are both set to 0, this element will be screened out of the search results.

Version 7.85 (2,765 materials & 23,815 datasets)

Added data for: 440C and Boehler alloys: W620, W600, W360, K353, K340, K360, K390, K490, K890, M261, M300, M303, M315, M333, M340, M368, M390, N685, N690, N695, S290, S390, S590, S600, S690, S705, S790, W350, W360, W400, W403, W460.
Changed the reference and data for the thermal conductivity for H11 and H13 tool steels.

Version 7.83 (2,734 materials & 23,700 datasets)

Added data for: PWA 1484, 2.25Cr-Mo steel, P122 steel, cadmium, cobalt, gallium, indium, silicon, thallium, zinc, Fe-3Si.

Version 7.81 (2,732 materials, 23,665 datasets)

Added data for Anviloy 1150.

Version 7.77 (2,731 materials & 23,657 datasets)

Ti C-110M, M252, Haynes 1002, Udimet 710, IN-100, MAR-M 509, Astroloy, Udimet D-979, Nimonic 81, Nimonic 115, Nimonic 942, Pyromet 860, Rene 95, Nickel TD, Udimet 400, Udimet 700, Udimet 710, Unitemp AF2-1 DA, L-605, Nimonic 901, Incoloy 807, Anviloy 1150, MoSi2, cobalt, nickel, rhenium.

Version 7.73 (2,731 materials & 23,503 datasets)

Added data for: 1015-1045 steels, antimony, beryllium, bismuth, chromium, cadmium, gold, iron, lead, nickel, niobium, palladium, platinum, sodium, tungsten, Vaseline (white petroleum jelly).
Fixed an error in the thermal expansion data for solid mercury.

Version 7.71 (2,731 materials & 23,413 datasets)

Added data for: M252, Inconel 700, Inconel 713C, TiC, helium, neon, fluorine, argon, air, CO, methane.

Version 7.67 (2,730 materials & 23,365 datasets)

Added data for: P91, P92, GX12CrMoVNbN9-1 (GP91), IN-100, Udimet 500, Udimet 700, Rene 95, Waspaloy, Astroloy, Ta-10W, Ti-13V-11Cr-3Al, Mo, H₂O (water ice).

Version 7.61 (2,723 materials & 23,287 datasets)

304, 347, 1018, Kovar, Nichrone V, MAR-M200, Nickel TD, C10200, C15100, C16210, C26000, C28000, C31400, C36000, C37300, C43300, C46400, C51100, C52400, C54400, C90500, Mg₂Pb, Pb-5Sn, Pb-10Sn, Pb-60Sn, Pb-63Sn, rhenium, titanium, tungsten, rhenium, ruthenium, cobalt, dysprosium, erbium, cadmium, CdS, Fe₃S, GaSb, AlSb, HgS, CdSe, HgSe, ZnTe, HgTe, SnS, SnSe, SnTe.
Fixed bug that at caused the x-axis to grow in size when resizing the plot.

Version 7.59 (2,723 materials & 23,197 datasets)

Added data for: 301, 304, 316NG, 300M, CF-8M, 17-4PH, 2024, 7075, 63Sn-Pb, In-3Ag, Ge, n-heptane (C₇H₁₆), cyclohexane, ethylbenzene, o-m-p-xylene, isopropylbenzene (cumene C₉H₁₂), chlorobenzene (C₆H₅Cl).
Added a new reference for the thermal conductivity of hexane & octane, the values changed slightly.
Added several improvements to the plots when using log axis.

Version 7.57 (2,710 materials & 23,118 datasets)

Added Larson-Miller curves for the creep of: A36, 302, 304, 422, C68700, C11400, C12200, C44300, C46400, C63000, C70600, C71500, C83600, C90500, C95800, Nimonic PK33, ZE41 RZ5, Ti-6Al-4V, V-57, WE54.
Added electrical resistivity data for several copper alloys.
Added data for: CMSX-8, CMSX-7, CMSX-486, Waspaloy, Haynes 282, Haynes 263, Haynes 282, Haynes R-41, Waspaloy, C63800, C15000, C11000, C10100, C10200, SiC, Zr, Pb(Mg_0.33Nb_0.66)O₃.
Corrected the Larson-Miller parameter for A297 HH from 16 to 12.
The electrical resistivity data for C52100 below 20 °C was multiplied by 1.116 to match the data from a new reference at high temperature.
The electrical resistivity data for C51000 below 20 °C was multiplied by 1.2213 to match the data from a new reference at high temperature.
The electrical resistivity data for C71500 below 20 °C was multiplied by 0.9728 to match the data from a new reference at high temperature.
Added support for using the mouse wheel to change the increment value in the iterations dialog.
Added support for using the mouse wheel to move along the curve in the property plots.

Version 7.55 (2,707 materials & 23,008 datasets)

In-738, GTD111 DS, Rene N5, CMSX-486, CMSX-4, B-1900 steel, PWA 1480, 2.25Cr-1Mo steel, 9Cr-1Mo steel, A128-E2 Hadfield steel, A106 steel, A333 grade 6 steel, A533 Gr B steel, A508 Cl3 steel, A302 GrB steel, GRCop-84, 2025 Al, several rare earth silicates.
Changed the room temperature density of PWA 1480 from 8.95 gm/cm³ to 8.70 gm/cm³.
Changed the room temperature density of Rene N5 from 8.56 gm/cm³ to 8.63 gm/cm³.

Version 7.51 (2,691 materials & 22,673 datasets)

Added data for: Cl, CO₂, SO₂, H₂S, propane.

Version 7.49 (2,691 materials & 22,658 datasets)

Added data for: Tecamax, Manganin alloy 130, Silafont 36, Mo La2O3 ODS, 255, 304, 304L, 309, 310, DP 780, Ti-6Al-4V, Ti-4Al-2.5Sn, Ti-4Al-1V-3Mo, Marageing 300, Inconel 718, C10100 (OFHC), 2219, 2014, 201, 201L, 321, TZM, 4340, 4130, AM50, Inconel MA 754, 9Cr-1Mo steel, 9Cr-2Mo steel, 9Cr-3Mo steel, V₂C, Mo₂C, Ta₂C, W₂C, Y₂O₃, Y₂O₃-9La₂O₃, Kevlar 49, G-10CR, G-11CR, pyrolytical graphite, several glasses, CsCl, silicon, titanium, molybdenum, nickel.

Version 7.45 (2,674 materials & 22,371 datasets)

Added data for several organic/hydrocarbon gases and liquids.
Fixed bug in the Windows version that would cause the program to crash when opening certain files.
Fixed bug in the Linux version that caused the program to crash when opening a database file in the editor.

Version 7.43 (2,669 materials & 22,257 datasets)

201L (UNS S20103), 201LN (UNS S20153), Nitronic 60 (UNS S21800), balsa wood, indium, NH₃ (ammonia), N₂O (nitrous oxide), NO (nitric oxide), NF₃ (nitrogen trifluoride), SO₂ (sulfur dioxide), CO₂, CO, CF₄, C₂F₆, SF₆, C₂H₄O, WF₆, HBr, Ga(CH₃)₃ (trimethyl gallium), several organic/hydrocarbon gases and liquids.
Fixed menus that would not close on dual monitor systems.

Version 7.41 (2,639 materials & 21,890 datasets)

Added data for: Al₂O₃, Ti-6Al-4V, Ti-46.5Al-2Nb-2Cr, ZrC, Ti₃SiC₂, Li₂SO₄, AgI, iridium, palladium, platinum, vanadium, silicon, argon, krypton.
Added composition text field at bottom of main window when a material.

Version 7.39 (2,637 materials & 21,817 datasets)

Ag₂SO₄, Li₂SO₄, Al-22Si, Al-30Si, compacted graphitic irons.
Added the ability to copy the plot to the clipboard (Windows only).
Fixed error in mJ/kg/K specific heat units (off by a factor of 1000).

Version 7.35 (2,629 materials & 21,787 datasets)

Added data for: Ti-6Al-4V and aluminum alloys 1100, 1350, 2014, 2018, 2020, 2218, 2219, 2618, 3003, 3004, 4032, 5005, 5050, 5052, 5056, 5083, 5086, 5154, 5356, 5454, 5456, 6061, 6063, 6151, 6201, 7079, 7178.
Added the ability to click on plot to display the data values.

Version 7.31 (2,629 materials & 21,473 datasets)

Added data for: Monel 400, Monel K-500, Nickel 200, Nimonic 80A, Nimonic 81, Nimonic 90, Nimonic 105, Nimonic PK33, Ni-SPAN C alloy 902.

Version 7.29 (2,629 materials & 21,373 datasets)

Added data for: Inconel 751, Inconel 783, Inconel MA 754, Inconel MA 758, Haynes 230, Inconel X-750.
Fixed an error in the thermal conductivity data for: Monel 400, Monel 405, Inconel 625, Inconel 718.

Version 7.27 (2,629 materials & 21,343 datasets)

Added data for: Ferry alloy, Incoloy 27-7MO, 316, 321, Incoloy 864, Incoloy 907, Incoloy 909, Incoloy 925, Monel K-500, Incoloy 945, Incoloy 800 & 800H/HT, Inconel 22, Hastelloy C22, Inconel 600, Inconel 601, Inconel 617, Inconel 625, Inconel 686, Inconel 690, Inconel 706, Inconel 718, Inconel 725.

Version 7.23 (2,627 materials & 21,264 datasets)

Added data for Incoloy 800H & 800HT.

Version 7.21 (2,627 materials & 21,214 datasets)

Added data for: silver, NbC, TaC, various perovskites, gypsum.
Changed the reference and data for Incoloy 800H & 800HT.
Added support for ANSYS WorkBench 12.
Added additional units for specific heat.

Version 7.17 (2,619 materials & 21,150 datasets)

Added data for: NaLaS₂, NaLaS₂ + 20 mol% CaS, NaLaS₂ + 40 mol% CaS, NaLaS₂ + 50 mol% CaS, NaLaS₂ + 70 mol% CaS, NaLaS₂ + 90 mol% CaS.

Version 7.13 (2,613 materials & 21,144 datasets)

Added data for: Al₃Ni, Raney nickel, several types of limestone.

Version 7.09 (2,607 materials & 21,111 datasets)

Changed the references and data for the elastic modulus several aluminum alloys.
Added data for: DP 600, A390, LiBr, SG10, SG80, SG773, Schott 8252, Schott 8253, Philips 360, NbC, VC, V₂C.

Version 7.07 (2,597 materials & 20,796 datasets)

Added data for: ZM21, ZEK100, MnO, C52100, Invar, alloy 39, alloy 42, alloy 46/48/49/52, Vacovit 500/520/540, Ferritic ductile iron, DP 450, DP 800, DP 980, C36000, TA16 (Ti-2Al-2.5Zr), AL 6022, Ti-46Al-2W-0.5Si, ASME-P92, DP 780, DP 580.

Version 7.05 (2,583 materials & 20,737 datasets)

Added data for: Zr₂[Al(Si)]₄C₅, Zr₃[Al(Si)]₄C₆, Ti, Hf-3Zr, Magsimal-59, Udimet 720LI, Sn-3.8Ag-0.7Cu, Sn-1Ag-0.5Cu, various cokes/coals
Added several Larson-Miller curves.

Version 7.03 (2,567 materials & 20,511 datasets)

Added data for: 2205, 2507, Ti-6Al-4V, Hastelloy C-22 HS, TRIP 590, E319, Mg₉₇ZnY₂, Mg₉₆Zn₂Y₂, Mg₉₇ZnGd₂, AlCu₄TiMg, Al-4Cu, Al-20Cu, Al-30Cu, magnesium.
Added several Larson-Miller curves.

Version 7.01 (2,556 materials & 20,257 datasets)

Added data for: Nichrome V, Nichrome, Brightray F, Brightray 35.
Changed references and data for High-perm 49, Vacumet HyMu 800 alloy, HyMu 800 alloy, Hy-Ra 80 alloy, Temp compensator 32 (type 1), Temp compensator 30 (types 2, 3, 4).

Version 6.89 (2,556 materials & 20,255 datasets)

Added data for: 5754, Inconel 600, indium, zinc, polycarbonate, polypropylene, SH teflon, Timetal 834, Hastelloy C, Ferrium S53, Carpenter 286-LNi, Custom 465.
Corrected error in electrical resistivity & expansion for Nichrome/Nichrome V.

Version 6.87 (2,551 materials & 20,204 datasets)

Added data for several cast irons.
Added support for the ANSYS classic format.
Added the ability to add multiple materials to a database at once.

Version 6.79 (2,549 materials & 20,154 datasets)

Added data for: Y, Y-Dy, Y-Sm and Y-Ce SiAlONS, Inconel 718, A380.
Added the ability to add materials to an existing SolidWorks/ANSYS database.

Version 6.71 (2,545 materials & 20,062 datasets)

Added data for: Kanthals, A356, 1010, 1015, 1020, A201, PMMA, 2507, Sn-3.5Ag-0.5Cu solders.

Version 6.65 (2,543 materials & 19,980 datasets)

Added magnetic properties.

Version 6.63 (2,537 materials & 19,929 datasets)

Added data for: HDPE, Zr₃Al₃C₅, ZrC, ZrB₂-15SiC, ZrB₂-15SiC-10HfB₂.

Version 6.61 (2,526 materials & 19,781 datasets)

Added data for: 329 (1.4460), 1.4418, UNS S34565, Hastelloy C-2000, Bergquist dielectric HT, Bergquist dielectric LTI, Bergquist dielectric MP, Bergquist dielectric CML.